Hustopeče

(+420) 519 818 204
hustopece@signumcz.com
Nadrazni 41
Hustopeče u Brna
693 01
GPS: 48.914257498432846, 16.71168834029674
MAXIMUM SIZE OF MATERIAL
11.3 x 3 x 1.3 m
(Length × Height × Width)
SIZE OF THE ZINC BATH
12 x 3.5 x 1.5 m
(Length × Depth × Width)
Consultation with a representative of the galvanizing plant is necessary for the boundary dimensions of the galvanized object.

RECEIPT AND DISPENSING OF ORDERS

WHEN PAYING BY TRANSFER
  • CZK
  • EUR
Monday - Friday  6:00 - 21:00
hour
break  18:00 - 18:30
hour
WHEN PAYING IN CASH / CARD
  • CZK
  • EUR
Monday - Friday 6:00 - 21:00
hour
break 18:00 - 18:30
hour
Attention change of opening hours!!!
from 1.9.2022   Monday - Friday 6:00 a.m. - 6:00 p.m

Outside these operating hours, orders can only be accepted and issued in agreement with the plant manager.

SPECIAL GALVANIZING SERVICES

FOR SMALL PARTS

CENTRIFUGAL
HOT DIP GALVANIZING

Suitable for galvanizing bolts, calipers, nuts, washers, studs and other steel parts. Centrifugation of the material removed from the galvanizing bath ensures an even coating without affecting the functionality of individual parts. This avoids additional cutting of threads and other modifications.
FOR THE ATTRACTIVE APPEARANCE

PASSIVATION
AGAINST WHITE RUST

The preservation or passivation of the zinc coating against white rust preserves the longer appearance of the freshly galvanized material and protects the coating against oxidation.
FOR THE LONGEST CORROSION PROTECTION

DUPLEX
COATS

Combined coatings composed of the hot dip galvanizing and the coats of painting. They have up to 2.3 times longer corrosion protection life than the sum of the life of the zinc coating and the paint. In our Hustopeče plant we have a modern large capacity paint shop where you can have a duplex protection applied to your galvanized products.

Another services

Material
transport

Upon request, we will also arrange the collection of steel to our galvanizing plants and the transport of the finished order to you or directly to the construction site.

Technology
consulting

We will advise you on the preparation of the material for galvanizing, eg the appropriate location and size of the drain holes.

Assessment of the
order directly at you

Not sure about the suitability for galvanizing? We will be happy to assess more complex orders directly at your factory or workshop.

HOW TO PROCEED

WHEN YOU WANT TO GALVANIZE A PRODUCT?

Measure the length, width and depth of the largest parts of your product. This will be useful when choosing a suitable galvanizing plant.

Read the instructions on How to prepare the material for galvanizing. Beware that width and depth have an effect on how you prepare the material.
Go to the I want to galvanize a product page or contact the nearest galvanizing plant that has a large enough bath.
I want to galvanize
Bc. Marian Preiss
Plant manager of the hot-dip galvanizing division and hot-dip galvanizing division
+420 724 039 380
+420 519 818 202
marian.preiss@signumcz.com
Ing. Antonín Schwarzer
Business director of the hot-dip galvanizing division
+420 602 541 912
+420 519 818 206
antonin.schwarzer@signumcz.com
Vladimír Horák
Sales Representative
+420 606 736 896
+420 519 818 219
vladimir.horak@signumcz.com
Mgr. Radek Pavlík, MBA
Sales Representative
+ 420 720 940 261
radek.pavlik@signumcz.com

About the galvanizing plant

Hustopeče is the largest of our Moravian galvanizing plants. Thanks to a 12-meter long bath we can galvanize the large parts of steel structures, whether of our own production or from the production of our customers. An important part of the plant is a separate facility for a centrifugal hot-dip galvanizing of fasteners and other small parts.

We have a large capacity wet painting plant in Hustopeče situated next to the hot-dip galvanizing plant. You can therefore take advantage of the so-called duplex protection of your steel, which is a combination of hot-dip galvanizing and organic coating.

YOU MAY FIND IT USEFUL

WHY GALVANIZE WITH SIGNUM

TOP QUALITY
ZINC COATINGS

We galvanize in accordance with the European ČSN EN ISO 1461 standard and the entire process complies with the requirements of the quality management system under ČSN ISO 9001:2015. We also hold other industry certifications.

SHORTEST
DELIVERY TIMES

Our galvanizing plants operate in a 3-shift mode. And we also galvanize at weekends. When you add thereto the polished processes and efficient logistics, you know the reasons why you'll always have your galvanized steel on time.

EXCEPTIONAL
CARE

Pozinkované díly ručně dočišťujeme od zinkových kapek a pečlivě kontrolujeme výslednou kvalitu povlaku. Vaši ocel skladujeme vždy pod střechou. Ať už na vás čeká v zinkovně nebo vám ji právě vezeme kamionem.

OTHER GALVANIZING PLANTS

NON-BINDING QUOTATION

Fill in a simple form and we will prepare
a quotation for you.
cross